What You Need to Know Before You Start
The Sebra Baby & Jr. crib mounting kit includes all the screws and plastic rails you need to assemble or repair your crib. Before you begin, check that your crib is marked with the EU Ecolabel and FSC™ labels. The kit and all Sebra spare parts are designed for products with these labels, and compatibility cannot be guaranteed for cribs without them.
The mounting instructions show which parts to use and how to fit them. Keep the instruction manual handy and follow it step by step. If you are replacing a side rail or other component, the same compatibility rule applies.
Mounting Kit Contents at a Glance
- Komplet monteringssæt til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Grå: Complete mounting kit with all screws and plastic rails for Sebra Sengen, Baby & Jr., marked with EU Ecolabel and FSC™. Fits all crib colors and is also available in white. This kit provides the hardware needed to assemble or repair your crib, so you don't have to source individual parts.

Komplet monteringssæt til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Grå
Step-by-Step Assembly and Fitting
Follow the mounting instructions included with your kit to identify which parts go where and how to attach them. The steps below give an overview of the process.
- Check compatibility: Confirm your Sebra crib has the EU Ecolabel and FSC™ marks. If not, the spare parts may not fit, and Sebra cannot guarantee compatibility or offer support.
- Lay out the parts: Open the kit and sort the screws and plastic rails. Refer to the mounting instructions to match each part to its location on the crib.
- Attach the side rails: When fitting an adjustable side, use the correct part (for example, part D or E) and secure it with the screws and rails from the kit. The instructions show the exact placement.
- Tighten and check: Once all parts are attached, go through the instructions again to verify every screw and rail is correctly fitted. A secure crib is essential for safe use.
Replacing an Adjustable Side Rail
If you are replacing the adjustable side of your Sebra Baby & Jr. crib, you can order the side as a spare part. The part with logo is labeled part E and the version without logo is part D. Both are designed for cribs marked with EU Ecolabel and FSC™.
The mounting instructions show which part you need and how to fit it. Use the complete mounting kit to ensure you have all the screws and plastic rails for a secure installation.
Spare Side Rail Options
- Justerbar side med logo til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Jetty Beige: Adjustable side with logo (part E) for Sebra Sengen, Baby & Jr., marked with EU Ecolabel and FSC™. If your original side has a logo and you want to match it, this is the correct replacement part.

Justerbar side med logo til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Jetty Beige - Justerbar side til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Classic White: Adjustable side (part D) for Sebra Sengen, Baby & Jr., marked with EU Ecolabel and FSC™. Choose this version if your crib side does not have a logo or you prefer a plain finish.
What the Instructions Do Not Cover
The supplied information does not include specific torque settings, safety ratings, or suitability for children. Always follow the official mounting instructions that come with your kit or spare part. If you are unsure about any step, contact Sebra customer support for guidance.




