Leander High Chair Coat Hook: Installation Tips

Quick answer

Installing the Leander high chair safety hook takes just a few minutes. Align the hook with the pre-drilled holes on your Leander Louie™ high chair, then tighten the screws evenly for a secure fit.

Step-by-step installation guide

1. Gather your tools: You only need a Phillips-head screwdriver. The safety hook comes with the required screws. Place the high chair on a stable, flat surface. Check that the screwdriver tip fits the screw heads snugly to avoid stripping.
2. Position the hook: Hold the safety hook against the front of the high chair seat, aligning the two screw holes with the pre-drilled holes on the chair frame. The curved part of the hook should face inward toward the seat. Make sure the hook is centered and level before inserting screws.
3. Insert and tighten screws: Insert both screws through the hook into the chair frame. Tighten them alternately—a few turns on one, then the other—until both are snug. Do not overtighten. Overtightening can crack the wood or strip the threads. Stop when the hook feels firm and does not wiggle.
4. Test the fit: Gently pull the hook toward you to confirm it is secure. Adjust the hook to one of its two positions if needed by loosening the screws slightly, moving the hook, and retightening. The hook should not rotate or slide. If it moves, re-tighten the screws evenly.

Product details

• Bøjle, Leander højstol - Care - Bøg: The Leander high chair safety hook is available in beech and fits the Leander Louie™ high chair. Choose the beech version to match your high chair's natural wood finish for a seamless look.