Montere Sebra Universal Sengehest på Baby & Jr. sengen

Quick answer

Mount the Sebra Universal Sengehest on the side of the bed only when the bed edge height is between 10.1 and 21.1 cm. The guard rail attaches easily and reduces the risk of your child falling out during sleep.

Mounting steps for the Sebra Universal Sengehest

1. Measure the bed edge height: Use a measuring tape to measure the height of the bed edge where the guard rail will attach. Confirm it is between 10.1 and 21.1 cm. Common mistake: guessing the height without measuring can lead to an insecure fit. If the height is outside the range, do not use the guard rail.
2. Position the guard rail on the bed side: Place the guard rail on the side of the bed where your child sleeps, aligning it so the mounting brackets fit over the bed edge. Common mistake: positioning it too close to the head or foot board, which can leave gaps. Ensure the rail is centered along the side for maximum protection.
3. Attach the mounting brackets: Secure the brackets to the bed edge according to the instructions. Tighten until snug but do not overtighten, as this can damage the bed. Common mistake: using excessive force that strips screws or cracks the bed frame. Check that the rail is firmly attached and does not wobble.
4. Verify stability and gap safety: Gently shake the guard rail to test stability. Ensure there are no gaps between the rail and the mattress that could trap your child. Common mistake: leaving a gap larger than a few centimeters, which poses a risk. Push the mattress tightly against the rail to minimize gaps.
5. Perform a final safety check: Before each use, pull on the rail to confirm it is secure. Teach your child not to lean on the rail. Common mistake: assuming the rail remains tight over time; check periodically and retighten if needed. Regular checks prevent accidents from loosening over time.

Product facts

• Sebra Universal Sengehest - Sebra Sleep - Classic White: Fits Sebra Bed, Baby & Jr. when pulled out to junior position and Sebra Bed, Junior & Grow, plus other beds with a bed edge height of 10.1–21.1 cm. Check your bed edge height before mounting to ensure a safe and secure fit.