Fitting the Sebra Sleep bumper to your child's bed
The Sebra Sleep bumper is designed to line a crib or junior bed, protecting your child from the edges and helping keep the pacifier inside. Before you start, confirm your bed matches the supported setups: the Sebra Sengen Baby & Jr. with the base plate in the top position, or a standard 60 x 120 cm child's bed.
The bumper has fine ties that let you secure it to the crib rails at both the top and bottom. Work around the bed, fastening the ties so the bumper sits evenly along the sides. Keep the fabric clear of your child's face and check that no ties are loose or reachable from inside the bed. If your bed does not match either supported setup, the bumper may not fit correctly.
Product details for the dusty blue bumper
- Sengerand 360 cm, Kapok - Sebra Sleep - Dusty blue: The Sebra Sleep bumper is 360 cm long and made with allergy-friendly kapok filling and certified organic cotton in Dusty blue. The length and materials tell you how much of the bed the bumper covers and what it feels like against your child's skin.
Sengerand 360 cm, Kapok - Sebra Sleep - Dusty blue - Sengerand 360 cm, Kapok - Sebra Sleep - Dusty blue: It fits the Sebra Sengen Baby & Jr. with the base plate in the top position and a standard 60 x 120 cm child's bed. Check your bed against these two setups before buying or fitting; other sizes are not confirmed by the supplied information.
- Sengerand 360 cm, Kapok - Sebra Sleep - Dusty blue: The ties allow you to fasten the bumper to the crib rails both at the top and at the bottom. Top and bottom attachment points help keep the bumper in place along the sides.
How to fit the bumper step by step
- Check your bed setup: Make sure you have a Sebra Sengen Baby & Jr. with the base plate in the top position, or a standard 60 x 120 cm child's bed.
- Position the bumper: Lay the 360 cm bumper along the inside of the crib rails, starting at one corner and working around the sides.
- Tie top and bottom: Use the supplied ties to fasten the bumper to the rails at both the top and bottom, keeping the fabric smooth.
- Check the fit: Confirm the bumper sits evenly and that no ties or loose fabric are within your child's reach inside the bed.
Why kapok filling is worth knowing about
Kapok is a silky-soft natural fiber that contains a natural antibacterial bitter substance, which the supplier says makes it impossible for house dust mites to live in it. That makes kapok a useful material for allergy-prone sleepers. Kapok is also temperature-regulating, so it helps moderate warmth around your child.
The bumper combines this kapok filling with certified organic cotton on the outside. The dusty blue color is part of the Sebra Sleep range, and the bumper is available in several colors and prints that mix and match with Sebra bedding, sheets, and canopies.
Washing and caring for the kapok bumper
The supplied product information directs you to follow the washing instructions on the product label. It does not specify a temperature, cycle, or drying method, so check the label on your bumper before washing. Use those label instructions as your guide rather than guessing at a setting.
For day-to-day freshness, air the bumper regularly and spot-clean small marks where possible. Always confirm any cleaning product is suitable for organic cotton and kapok before use. If the label is missing or unclear, contact the retailer for guidance rather than improvising a wash.
What to check before you buy
Measure your bed first. The bumper is confirmed for the Sebra Sengen Baby & Jr. with the base plate in the top position and for a standard 60 x 120 cm child's bed. If your bed is a different size or type, the fit is not confirmed by the supplied information.
The bumper is intended to protect your child from the bed edges and help keep the pacifier in the bed. It is not a substitute for safe sleep practices, and you should always follow your country's guidance on crib bumpers. The ties should be secured firmly and checked regularly for looseness.
