How to Install Support Legs on a Sebra Baby & Jr. Crib

Quick answer

To install support legs on a Sebra Baby & Jr. crib, you need the correct leg part (Part B) for your model, marked with EU Ecolabel and FSC. Follow the assembly manual to attach them securely to the crib frame.

Steps to install support legs

1. 1. Verify crib certification: Check that your Sebra Baby & Jr. crib has both EU Ecolabel and FSC™ marks. Only then can you use these support legs. If your crib lacks either label, these legs may not fit – contact Sebra support.
2. 2. Gather tools and parts: You need the support leg (Part B), a screwdriver (if required), and the crib assembly manual. Locate the leg attachment points on the crib frame. Keep the manual handy – it shows which leg goes where.
3. 3. Attach the leg to the frame: Align the leg with the designated slot or bracket on the crib's underside. Secure it using the screws or fasteners provided. Tighten firmly but avoid over-tightening to prevent damage. A common mistake is using too much force – hand-tighten then give a quarter turn.
4. 4. Check stability: Once attached, gently shake the crib to ensure the leg is secure and the crib sits level. Repeat for all four legs if replacing a set. If the crib wobbles, recheck alignment and tightness before use.

Product facts

• Støtteben til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Jetty Beige: Støtteben (del B) til Sebra Sengen, Baby & Jr., mærket med EU Ecolabel og FSC™. Ensures the leg is compatible with your certified Sebra crib, maintaining safety and warranty.

  

• Støtteben til Sebra Sengen, Baby & Jr. - Sebra Spareparts - Classic White: Støtteben (del B) til Sebra Sengen, Baby & Jr., mærket med EU Ecolabel og FSC™. Classic White offers a neutral finish that matches many nursery decors while providing the same certified fit.